Scaffolding blog

Scaffolding prop fork head is a fixed fork used for formwork support, usually used with steel prop, installed on the upper part of steel prop to support formwork. The fork head is called a cross head or a four-way scaffolding U head.

In construction works, EK's alloy beams are made of aluminum tubes with an outer diameter of 48.3 mm, and are used in aluminum scaffolding beams for stages, roofs, lighting and stages. This alloy beam is a standard size in scaffolding, so you can use common scaffolding fittings and connectors to secure to the scaffolding frame.

Formwork props are a must on almost every construction site. Adjustable formwork props are ideal for supporting ceilings, walls, and other structures.

How to install ringlock scaffolding?The installation process of Ringlock scaffolding is the same as other types of scaffolding systems, it is very simple, you only need to follow the steps we provide.1. Put the Base Jack on a flat and firm ground;2. Add base collar to connect scaffolding standard;3.

The steel prop is a riser support that can be adjusted arbitrarily within its range and used repeatedly for concrete formwork support. Top, bottom, inner, outer, sleeve, nuts, and pins make up a complete set of steel struts. One person can handle the steel stanchion, which can be quickly assembled i

The scaffolding base jack (screw jack) is used as the starting base of the scaffold, and provides stability by adjusting the jack nut of the base on uneven ground, and is used for level adjustment of the system scaffolding according to different underground heights.