Scaffolding blog

Scaffolding prop fork head is a fixed fork used for formwork support, usually used with steel prop, installed on the upper part of steel prop to support formwork. The fork head is called a cross head or a four-way scaffolding U head. The fork head of the scaffolding prop is composed of a bottom plate, four angle irons and a socket joint.

Formwork props are a must on almost every construction site. Adjustable formwork props are ideal for supporting ceilings, walls, and other structures.

The steel prop is a riser support that can be adjusted arbitrarily within its range and used repeatedly for concrete formwork support. Top, bottom, inner, outer, sleeve, nuts, and pins make up a complete set of steel struts. One person can handle the steel stanchion, which can be quickly assembled i

Steel Prop is primarily used by customers for construction, restoration or repair projects as a temporary support for load bearing surfaces such as ceilings. Before setting up a steel prop, perform a thorough risk assessment and consult a qualified structural engineer to advise you on the best plan

Steel prop, also known as adjustable steel prop, is mainly made of Q235 steel pipe, and the surface is treated by galvanizing, painting and powder spraying. The adjustment range of steel prop is divided into 0.8M, 2.5M, 3.2M, 4M or other special specifications. The range of use is also very wide, an

The scaffolding manufacturer introduced two welding robots for welding scaffolding. The first test was the welding of the steel prop fixed head, and everyone was very satisfied with the results. Compared with manual welding products, the finished products welded by robots have smoother and flatter w