Base jacks are usually installed on the ground for support and balance. These base jacks can support a weight of 6T and are widely used in foundation restoration projects. Base jack is assembled by base, threaded pipe and nuts. It can flexibly adjust the height of the construction system and is comp
Scaffolding prop fork head is a fixed fork used for formwork support, usually used with steel prop, installed on the upper part of steel prop to support formwork. The fork head is called a cross head or a four-way scaffolding U head.
In construction works, EK's alloy beams are made of aluminum tubes with an outer diameter of 48.3 mm, and are used in aluminum scaffolding beams for stages, roofs, lighting and stages. This alloy beam is a standard size in scaffolding, so you can use common scaffolding fittings and connectors to secure to the scaffolding frame.
How to install ringlock scaffolding?The installation process of Ringlock scaffolding is the same as other types of scaffolding systems, it is very simple, you only need to follow the steps we provide.1. Put the Base Jack on a flat and firm ground;2. Add base collar to connect scaffolding standard;3.
The steel prop is a riser support that can be adjusted arbitrarily within its range and used repeatedly for concrete formwork support. Top, bottom, inner, outer, sleeve, nuts, and pins make up a complete set of steel struts. One person can handle the steel stanchion, which can be quickly assembled i