/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
             WeChat:
             Kevin_EK
             E-mail:
              kevin@ekscaffolding.com
You are here: Home » Blog » Scaffolding News » Why choose steel prop on construction?

Why choose steel prop on construction?

Views: 0     Author: Site Editor     Publish Time: 2023-01-03      Origin: Site

Steel prop, also known as adjustable steel prop, is mainly made of Q235 steel pipe, and the surface is treated by galvanizing, painting and powder spraying. The adjustment range of steel prop is divided into 0.8M, 2.5M, 3.2M, 4M or other special specifications. The range of use is also very wide, and it is most frequently used in house construction.

 steel prop

Why do most people choose to use steel prop on construction projects? There are mainly the following points:

1. Steel prop is light in weight, easy to install and dismantle, fast in construction speed, and can be reused (environmentally friendly and green).

2. There are relatively few steel props supporting the site, and the operation space is large, personnel can pass through, material handling is smooth, and the site is easy to manage.

3. The force is reasonable, the bearing capacity is high, and the number of steel props required is small, which reduces the construction cost.

4. Strong versatility, able to adapt to building construction projects with different storey heights and different board thicknesses.

5. Under the same support area conditions, steel prop consumes less steel than cuplock scaffolding and steel pipe scaffolding, only 30% of bowl button scaffolding and 20% of steel pipe fastener scaffolding.

 

How to use adjustable steel prop?

1. First use the handle to screw the adjusting nut to the lowest position.

2. Insert the upper tube into the lower tube to approximately the desired height, then insert the pin into the adjustment hole located above the adjustment nut.

3. Move the adjustable steel prop to the working position, and use the handle to rotate the adjusting nut so that the adjustable support can be supported against the supported object.

 

Precautions for using Adjustable steel prop

1. The adjustable steel prop should be placed on a flat bottom surface with sufficient strength;

2. The adjustable steel prop should be installed vertically to avoid load as much as possible;

 

EK is a professional manufacturer of scaffolding, currently has several sets of scaffolding molds, which can produce steel prop, base Jack, Ringlock scaffolding, cuplock scaffolding and other products.


Get in Touch

86-25-5712 3616

0086-18606192990

kevin@ekscaffolding.com

Scaffolding Manufacturer

EK Scaffolding

Contact Us

Copyright © 2016 - 2022 EK Metalwork Co.,Ltd. All rights reserved.